Home | Products | About Us | Press Room | Contact Us | Login | Quote Request
|
|
|
|
|
Home | Products | About Us | Press Room | Contact Us | Login | Quote Request |
||
| ||||||||||||||||||||||||
|
||||||||||||||||||||||||
|
|
Export Licensing
|
|
Export Requirements:
Sales of products are Subject to the Department of State approval where applicable. Several SDI products are subject to ITAR (International Traffic in Arms Regulations, 22 CFR Chapter 1, Subchapter M) and SME (Significant Military Equipment) Regulations. An EXPORT LICENSE must be obtained from the U.S. Department of State before these products can be exported. For any SDI product subject to ITAR and SME regulations and to be exported, either as unmodified stand alone units, or as a component in a higher level assembly up to and including aircraft, spacecraft, ground vehicles, and ships or other ocean vessels, irrespective of their intended use, the buyer is required to provide notification to the end user of their responsibilities as directed by 123.9 (b) of the above cited ITAR.Products under the category of State Department are currently classified as Significant Military Equipment (SME) under the International Traffic In Arms Regulations (ITARS) and as such require either prior approval or prior notification to the Office of Defense Trade Controls, prior to the Submission of any proposals for the following products :
MotionPak® C-MIGITSTM III QDARS The QRS14 (GyroChip® II), Horizon, MotionPak® II, LCG50, MMQ50 and MMQ-G are NOT subject to ITAR and SME regulations. These products have an Export Commodity Classification of ECCN 7A994 Country Chart Reason for Control Code AT1, as determined by Commerce Department under the Export Administration Regulations. These products are eligible for export with No License Required (NLR) to any end-user in all countries of the world except Cuba, Iran, Libya, North Korea, Sudan and Syria, unless the end application is related to chemical or biological or nuclear weapons or missile activities. An original end user statement (on company letterhead) will be required for all export sales. The following Destination Control Statement will be included in any resulting Sales Order Acknowledgements, Shipper’s Export Declaration, and all invoices: "These commodities, technology or software were exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
US Department of State Embargo
Country List Please fill out the DSP-83 form below with the following instructions attached and send to Systron Donner Inertial for submittal.Download DSP-83 Form The PDF versions require you to have the free 
|
|
|
|
|
©2003 Systron Donner
Inertial. All rights reserved. | Privacy Statement
|